Material

Fiberglass

GOOT Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation material which was a breakthrough in the field of insulation and refrigeration.

The VIP's are constructed using a special technique by inserting the open-celled filler into a centralized sealed barrier.

Using the core material which provides the structural strength and resistance for heat exchange making the VIP extremely efficient in low thermal conductivity that is less than 0.004w/m. K.

The VIP has been proven to exceed its performance than the conventional insulations by far. Vacuum Insulation panels are our new high- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The core material provides the structural strength and resistance to heat transfer.

Applications:

Cold insulated equipments of different industries

Shipping containers

Spaceflight/ Aviation

Communication/ transportation

Medical Refrigerators and freezers

Marine and recreational refrigeration vehicles

Civil refrigeration equipment

Insulation for construction

Advantages:

7- 10 times better insulation value then conventional insulations

Thin wall, small volume, lightweight

Extremely low thermal conductivity less than 0.004w/m. K

Resistance to heat transfer among the gas molecules

Non-ODS material

Not harmful for the environment

Meets all insulating requirements

Specification:

1) Compressive Strength: 0.14MPa - 0.25MPa

2) Thickness: 10 - 35mm

3) Maximum Dimensions: 1600 x 700 x 35mm

4) Core Material: Superfine fibreglass

5) Thermal Conductivity: Less than 4mw/m. K(under standard environmental condition: Ambient temperature 24degree centigrade, relative humidity 50%)

6) Density: About 230kg/m3

7) Internal Pressure: 0.1Pa

8) Operating Ambient: -50 ~ 70 degree centigrade

9) External Tolerance of VIP: 1mm

10) Packing: Carton with foam and air bubble film

11) Service life: 10-15 years under standard environmental condition

Structure:

The VIP (vacuum insulation panel) consists of three components of core material, barrier/ envelope, and Getter/ Desiccant Italian imported.

Core Materials: Fiberglass, Phenolic Foam

Barrier/ Envelope: Combination of multilayer polymer film, Aluminum foil, Ultra high barrier

Getter/ Desiccant: Imported from Italy